Toyota OEKAKI 50 Instruction Manual page 61

EN
6
Turn the handwheel towards yourself until the
needle is as far as possible to the left.
7
Position the fabric so that the needle slightly
catches the fold.
* Only catch 2-3 threads on the project fold as shown below
in correct stitching diagram.
8
Lower the presser foot, adjust the adjusting
screw so that the fold aligns with the guide, and
then sew with the fold against the guide.
Tip
Use invisible thread when sewing hems.
Transparent for light colored fabric
Shaded for dark colored fabric
❑ Correct
Small stitches evenly aligned on right
side of fabric
Wrong side Right side
(When unfolded)
❑ Incorrect
Needle catches too much of the fold
Wrong side Right side
(Large stitches on right side)
* Refer to steps 6 to 8 and follow the instructions carefully.
Needle on
left side
Needle on left side
Guide
Project
fold
Needle does not catch the fold
Wrong side
(Blind hem stitches do not come
through)
Project
fold
Adjusting
screw
Right side
61