Table of Contents
Advertisement
6
Slide the thread winding spindle in the direction of
the arrow until it snaps into place.
7
While holding the thread with your right hand,
press the
(start/stop) button with your left
hand. Otherwise, begin winding the bobbin by
stepping on the foot controller.
After the thread has been wound around the
bobbin about 10 times, press the
button. Otherwise, release the foot controller to
stop the sewing machine.
8
Cut off the extra thread above the bobbin
hole.
* Cut off the thread so that no excess extends from the
bobbin hole.
30
The LEDs in the display
blink in sequence to
indicate that the bobbin is being wound.
(start/stop)
Hide quick links:
Advertisement
Table of Contents
