Toyota OEKAKI 50 Instruction Manual page 77

EN
8
Lightly place your hands on the fabric to guide it
and sew.
* Lightly step on the foot controller to begin sewing.
* Release the foot controller to stop sewing.
Tip
In OEKAKI mode, the fabric can be moved with the presser foot
lowered.
Do not touch moving parts such as the
needle.
Doing so could cause injuries.
In OEKAKI mode, feed the fabric according to the sewing speed.
Feeding the fabric faster than the sewing speed could break the needle and cause injuries.
Do not pull the fabric excessively while sewing.
Doing so could break the needle and cause injuries.
* To change the sewing speed, press the
up, and then change the setting.
* While the stitch width can be adjusted by pressing the foot controller, the maximum stitch width can also be
changed. To change the maximum setting, press the
LED lights up, and then change the setting.
Caution
Do not touch the top of
the presser foot.
Caution
(function) button until the
(function) button until the
(sewing speed) LED lights
(stitch width)
77