Tacking - Toyota OEKAKI 50 Instruction Manual

Tacking

For video tutorial, visit http://www.toyotaoekakisewing.com
Tacking (temporary stitching) can be sewn with the sewing machine to prevent overlapping layers of fabric from
becoming misaligned.
1 1
Follow steps through
2
From the operation panel, select stitch number A3.
Press the function button until the
and then press the
stitch number to A3.
* The stitch number appears in the LED display.
<Stitches that can be used>
No. Application
A3 Tacking (left needle position)
3
Adjust the upper thread tension.
Set the upper thread tension dial to "-1".
4
Position the fabric under the presser foot, and
then lower the presser foot lever.
5
Lightly guide the fabric with your hands, and then step on the foot controller.
* When stitch number A3 is selected, pressing the foot controller only sews one stitch. Only one stitch is sewn, even if
you keep the foot controller pressed down.
84
5
in "Sewing (free-motion embroidering)" (refer to page 74).
LED lights up,
(setting) buttons to set the
Presser foot
Embroidering foot
Presser
foot lever