Econo Operation - Daikin E-Series Service Manual

Instruction

2.2.9 ECONO Operation

ECONO operation is a function which enables efficient operation by
lowering the maximum power consumption value.
" To start ECONO operation
1. Press "ECONO button".
" To cancel ECONO operation
2. Press "ECONO button" again.
NOTE
• ECONO Operation can only be set when the unit is running.
Pressing the operation stop button causes the settings to be canceled, and the "
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit
(operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
The fan strength does not change in ECONO operation.
• POWERFUL operation and ECONO operation cannot be used at the same time.
Priority is given to POWERFUL operation.
• Power consumption may not drop even if ECONO operation is used, when the level of power consumption is already low.
190
• " " is displayed on the LCD.
• " " disappears from the LCD.
ECONO
ON/OFF
TEMP
POWERFUL
MODE FAN SWING
SILENT COMFORT SENSOR
ON CANCEL
OFF
TIMER
" disappears from the LCD.
System Configuration
SiENBE18-621
1, 2