Air Flow Selection - Daikin E-Series Service Manual

SiENBE18-621

" Air flow selection

•
When setting the air flow selection switch to
•
Operating mode
COOL mode
HEAT mode
• During Dry mode, so that cold air does not come into direct contact with people, air is blown upper air outlet.
When setting the air outlet selection switch to
• Regardless of the operating mode or situation, air blows from the upper air outlet.
• Use this switch when you do not want air coming out of the lower air outlet. (While sleeping etc..)
CAUTION
• Do not try to adjust the flap by hand.
• When adjusting by hand, the mechanism may not operate properly or condensation may drip from air outlets.
System Configuration
Make air flow selection according to what suits you.
Air conditioner automatically decides the appropriate blowing pattern depending on the operating
mode/situation.
• When the room has become fully
cool, or when one hour has passed
since turning on the air conditioner.
• At start of operation or other times
when the room is not fully cooled.
• At times other than below.
(Normal time.)
• At start or when air temperature is
low.
Situation
•
•
•
Instruction
Blowing pattern
So that air does not come into direct
contact with people, air is blown
upper air outlet, room temperature is
equilised.
Air is blown from the upper and
lower air outlets for high speed
cooling during COOL mode, and for
filling the room with warm air during
HEAT mode.
So that air does not come into direct
contact with people. Air is blown
upper air outlet.
187