Detection Of New Transfer Belt Unit - Develop QC 2235 Plus Service Manual

QC 2235plus Theory of Operation Ver.1.0 Mar. 2004
10.3.9

Detection of New Transfer Belt Unit

• When a new Transfer Belt Unit is installed in the machine, the life counter is automatically
cleared through new unit detection.
• The new unit detection is made when the Power Switch is turned OFF and ON or the
Right Door is opened and closed.
• New unit detection timing/operation
The Power Switch is turned OFF
and ON, Front Door opened and
closed, or Left Door opened and
closed
Checks whether the Transfer Belt
Unit is mounted or not.
New unit detection check
Lets the Transfer Belt perform ini-
tial operation.
Makes image transfer ATVC
adjustment.
Runs image stabilization
sequence.
New Unit is release (Life counter
clear)
2-45
Transfer Corona section