Staple Operation - Develop QC 2235 Plus Service Manual

QC 2235plus Theory of Operation Ver.1.0 Mar. 2004
4.3.3

Staple operation

• After the paper stacking and alignment operation on the Finishing Tray have been com-
pleted, a stack of paper is taken up with the Upper, and Lower Exit Rollers by moving the
Swing Guide down with the Paddle Motor rotating in the reverse direction.
• Stapling is performed by moving the Stapling Unit according to the specified stapling
position. However, if stapling is made at one place at the rear side, it is made at the
stand-by position without movement of the Stapler Unit.
• If the Stapling Unit is moved toward the front side, the Finishing Tray Stopper is lowered.
Paper
Elevator Tray
Swing Guide
Lower Exit Roller
2-15
Mechanical operations
Upper Exit Roller
Finishing Tray Stopper
Stapling Unit