Develop QC 2235 Plus Service Manual page 29

QC 2235plus Theory of Operation Ver.1.0 Mar. 2004
[10] Paper Separation
Transfer Belt
[11]
Cleaning
[12] PC Drum Cleaning • The residual toner left on the surface of the PC Drum is scraped off.
[13] Main Erase
• The paper, which has undergone the 2nd image transfer process, is neu-
tralized so that it can be properly separated from the Transfer Belt by the
Paper Separator Claws.
• A charge is applied to the Transfer Belt. By potential difference, residual
toner on the surface of the Transfer Belt is collected for cleaning.
• The surface of the PC Drum is irradiated with light, which neutralizes any
surface potential remaining on the surface of the PC Drum.
1-9
Image creation process