Exiting Operation - Develop QC 2235 Plus Service Manual

Mechanical operations
4.2.8

Exiting operation

• The Paddle, driven by the Paddle Motor, makes the Swing Guide move down and then
the paper is taken up with the Upper, and Lower Exit Rollers.
• Next, the Exit Motor rotates in the forward direction to transport the paper taken up with
the Exit Rollers toward the Exit Section by the Exit Rollers and the Exit Belt.
• The Exit Belt Home Position Sensor turns OFF and then the Swing Guide moves up after
the Motor has been driven for a given number of pulses. The Exit Motor is driven to trans-
port a stack of paper with the Separators, of the Exit Belt, rotating in synchronization with
the Lower Exit Roller onto the Elevator Tray.
Elevator Tray
QC 2235plus Theory of Operation Ver.1.0 Mar. 2004
Exit Belt
Exit Belt Home Position
Sensor (PI7-FN)
2-12
Paddle
Swing Guide
Upper Exit Roller
Stopper
Lower Exit Roller
Separator