Develop QC 2235 Plus Service Manual page 12

SAFETY AND IMPORTANT WARNING ITEMS
[3] MEASURES TO TAKE IN CASE OF AN ACCIDENT
1. If an accident has occurred, the distributor who has been notified first must immedi-
ately take emergency measures to provide relief to affected persons and to prevent
further damage.
2. If a report of a serious accident has been received from a customer, an on-site evalua-
tion must be carried out quickly and Develop must be notified.
3. To determine the cause of the accident, conditions and materials must be recorded
through direct on-site checks, in accordance with instructions issued by Develop.
[4] CONCLUSION
1. Safety of users and customer engineers depends highly on accurate maintenance and
administration. Therefore, safety can be maintained by the appropriate daily service
work conducted by the customer engineer.
2. When performing service, each product on the site must be tested for safety. The cus-
tomer engineer must verify the safety of parts and ensure appropriate management of
the equipment.
[5] FUSE
CAUTION
Double pole / neutral fusing
ATTENTION
Double pôle / fusible sur le neutre.
[6] LED Radiation Safety
• This product is a copier which operates by means of a LED (light emitting diodes) expo-
sure system. There is no possibility of danger from the LED optical radiation, because
the LED optical radiation level dose not exceed the accessible radiation limit of class 1
under all conditions of operation, maintenance, service and failure.
QC 2235plus Field Service Ver1.0 Mar.
S-10