Operating the memory card format
1.
Install the CF card or USB memory to GOT.
Refer to the following for inserting/removing
method of CF card or USB memory.
(Hardware) 8.3.2 CF card
(Hardware) 8.5.2 Install USB peripheral
devices
2.
Touch and select the drive to format by drive
selection.
3.
If touch [Format] button, the password input
screen is displayed.
4.
Type [1] [1] [1] [1] and touch the [Enter] key. The
dialog box shown on the left will appear. (The
password is fixed to 1111.)
Confirm the contents of the dialog box, and touch
[OK] button when execute the format of CF card
or USB memory.
When cancel the memory card format, touch
[Cancel] button.
5.
If touch [OK] button by step4, the dialog
mentioned left is displayed for reconfirm.
6.
Reconfirm whether to format the CF card or USB
memory.
Touch the [OK] button to start the format.
Touch the [Cancel] button to cancel the format of
CF card or USB memory.
7.
When the formatting is completed, the completion
dialog mentioned left is displayed.
8.
If touch [OK] button, closes the dialog.
4.3 Memory/Data Control
1
2
3
4
5
6
7
4 - 17