Table of Contents
Advertisement
4.2.2
Backup/restoration setting
The storage location for backup data can be set.
For how to use the backup/restoration, refer to the following manual.
• GOT1000 Series User's Manual (Extended Functions, Option Functions) for GT Works3
(11 BACKUP/RESTORE)
• GOT1000 Series Extended/Option Functions Manual for GT Designer2/GT Works2
(11 Backup/restore)
Set the following items with touching the items on the GOT.
Function
The drive for storing backup settings, including
Drive for
parameters and passwords for controllers, can
backup setting
be selected.
Drive for
The drive for storing backup data can be
backup data
selected.
The GOT automatically backs up data when
Trigger backup
triggers (Rise, Time) specified for each backup
setting
setting are met.
Set the maximum number of backup data to
Max. of backup
be stored.
data
(When 0 is specified, the GOT does not check
the number of backup data to be stored.)
Set whether to enable the CPU No. setting or
not.
(When [Enabled] is selected, the GOT starts to
Enable CPU
communicate with only the specified PLC.
No. setting
Therefore the network batch backup/
restoration on the multiple PLCs cannot be
executed.)
Description
A: Standard CF Card
B: Memory card
E: USB drive
<Default: A: Standard CF Card>
A: Standard CF Card
B: Memory card
E: USB drive
<Default: A: Standard CF Card>
None/Rise/Time
<Default: None>
Setting range: 0 to 50
<Default: 10>
YES/NO
<Default: NO>
Setting range
4.2.3 Trigger backup settings
4.2 Debug Setting
1
2
For GT
For GT
Designer2
Designer3
3
4
5
6
7
4 - 5
Advertisement
Table of Contents
