Table of Contents
Advertisement
(5) Data check operation
Carrys out data check of the selected project file.
Dialog at data check normal
Dialog at data check abnormal
(6) Download operation/setup operation
(a) Download operation
Transfers the project data stored in the A drive (Standard CF Card), B drive (Extended memory card) or E
drive (USB drive) to the C drive (Built-in flash memory). (The GOT monitors using the data in the C drive.)
(This item explains using the A drive.)
POINT
POINT
POINT
Before download operation
(1) Setup cancel
When the project data in the A drive or B drive is set up, the project data cannot be downloaded to the C drive.
Execute setup cancel (
(2) Project data to be stored in a CF card
When storing the project data from GT Designer3 or GT Designer2 to CF card, select [C: Built-in flash
memory] for [Project Data] in the [Boot Drive].
6 - 120
6.3 OS/Project Information
(7) (b) Setup cancel operation) before downloading the project data.
1.
Touch the [Data check] button after selecting
the file for data check.
The data check is executed and the result is
displayed by the dialog box shown left.
2.
If touch [OK] button, the dialog box is closed.
Advertisement
Table of Contents
