When The Coreos Cannot Be Installed - Mitsubishi GT16 User Manual

7.5.2

When the CoreOS cannot be installed

When the CoreOS cannot be installed, confirm the following item.
If the CoreOS cannot be installed even after checking the following item, the error may be caused by a hardware failure.
Please consult your local Mitsubishi (Electric System) Service center or representative.
The CoreOS installation is not executed even when installing the CF
card in the GOT.
The message is displayed on
the GOT
7 - 14 7.5 CoreOS
Error
GOT error. Contact your local sales
office.
CF card error.
Installation will be cancelled.
Check whether the CF card can be
used.
Optional unit has been connected to
extension I/F slot.
The optional unit should be removed
before starting installation.
Installation will be canceled.
GOT type and OS version do not
match.
Installation will be canceled.
The version of OS is not acceptable
to this GOT.
Installation will be canceled.
Confirm the version of OS.
Memory card access switch is off.
Turn on the switch and restart the
GOT.
Installation will be canceled.
(1)Check whether the CF card access switch of the GOT is on.
If the switch is off, switch it on.
(2)The writing from the GT Designer3 or GT Designer2 to the CF card may not
have been completed normally.
Execute the writing from the GT Designer3 or GT Designer2 to the CF card
again.
The GOT main unit is broken.
Please consult your local Mitsubishi (Electric System) Service center or
representative.
The CF card is defective.
(1) Format the CF card and re-execute.
(2) Replace the CF card.
Remove the extension unit installed on the GOT.
The GOT type selected at [Core OS write] of the GT Designer3 or GT Designer2
is not correct.
Confirm the GOT type and perform [Core OS write] again.
Install CoreOS from the latest GT Designer3 or GT Designer2.
The CF card access switch is off. Turn the switch on and restart the GOT.
Action