Table of Contents
Advertisement
5.
GOT restarts automatically after the installation is completed.
6.
After confirming that GOT restarted normaly, switch OFF the CF card access switch of GOT. Confirm the
CF card access LED is not lit, remove the CF card from the CF card interface of GOT.
(2) When installing with USB memory
1.
Install the USB memory in which BootOS, standard monitor OS or project data is stored in the CF card
interface of GOT.
2.
Display the data control function screen (Utility) on the GOT, and install BootOS, standard monitor OS from
the USB drive to GOT.
3.
The USB memory access LED is lit during install execution.
Do not pull out the CF card or power OFF the GOT while the USB memory access LED is lit.
4.
GOT restarts automatically after installation is completed.
5.
After confirming normal restart, confirm that the USB memory access LED is not lit.
Display the USB device status screen and remove the USB memory from the USB interface of GOT.
7 - 8
7.3 BootOS and Standard Monitor OS Installation Using CF Card or USB Memory
Reboot.
Reboot.
4.3.7 USB device status display
Touch [Install]
Advertisement
Table of Contents
