Batch Self Check - Mitsubishi GT16 User Manual

5.2 Batch Self Check

5.2.1 Batch self check
The Batch self check collects data about energization time, installed OS and others, and can display it in View self check
results menu.
In the batch self check screen, the CF card or the USB memory is set as the export destination of the system status log.
Item
System status log, Diagnostic data that the GOT system status has been logged
Also, the following information are displayed in View self check results menu.
Item
Information at power-on, Information at system start up, Maintenance time notification
Start up information
information
System status 1 Installed OS, Installation history
System status 2 Communication driver, GOT system configuration information
Communication setting
Displays the controller status.
contents
Operation history Displays the operation history and execution time.
Screen switching history Displays the screen switching history and execution time.
Clock change history Displays the time before and after clock change.
System alarm history Displays the alarm and alarm occurrence time.
CPU error history Displays the ChNo., error messages and error occurrence time.
GOT start time history Displays the time GOT was powered on.
Description
Description
5.2 Batch Self Check
1
2
For GT For GT
Designer2 Designer3
3
For GT For GT
Designer2 Designer3
4
5
6
7
5 - 32