Debug Setting; Q/L/Qna Ladder Monitor Setting - Mitsubishi GT16 User Manual

4.2 Debug Setting

4.2.1

Q/L/QnA ladder monitor setting

Storage locations and others for data to be used for the ladder monitor function can be set.
Saving the ladder data cuts out the need for reading the ladder data from PLC CPU at the next GOT start-up, enabling to
start the ladder monitoring earlier.
Refer to the following manual for details of the ladder monitoring function.
•GOT1000 Series User's Manual (Extended Functions, Option Functions) for GT Works3
•GOT1000 Series Extended/Option Functions Manual for GT Designer2/GT Works2
Function
Data save Select the ladder data storage location of the
location Q/L/QnA ladder monitor.
Whether to automatically read sequence
Automatic program when the ladder monitor starts from
program read a touch switch or Advanced Alarm Display
can be selected.
If both Common comment and Each program
comment are set for the same device in a
Priority
sequence program, select either of the
comment
comments to be displayed in the ladder
monitor.
Select if monitoring local devices are
executed or not when monitoring devices with
Local device
the ladder monitor.
monitor
(Applicable to only the MELSEC-Q series
ladder monitor)
Drive for device Select the drive to be used for reading
comment comment data for the ladder monitor.
Comment Select if the comment data used in the ladder
setting monitor is displayed/hidden.
Select [Save a ladder program]/[Save ladder
Setting to save
programs] for the save setting of ladder data
ladders
to be used in the ladder monitor.
POINT POINT POINT
Ladder data to be saved
(a) The ladder data to be saved is used by the GOT to execute ladder monitoring.
The ladder data can be saved in the CF card with this function, however it cannot be copied in the PC to
be referred/edited with GX Developer, etc.
The name of the ladder data to be stored can be checked with the project information.
For how to check the name of ladder data, refer to the following.
6.3.2 Display operation of project information
(b) The ladder data saved in the built-in flash memory and CF card or USB memory (file name: CIRDAT) can
be deleted by selecting [Project information] in [OS/project information] of [Data control].
6.3.2 Operation of project information
Description
C: Flash Memory/B: Memory card/A:
Built-in CF Card/Not store
<Default: C: Flash Memory>
YES/NO
<Default: YES>
Common comment/Each program
comment
<Default: Common comment>
YES/NO
<Default: NO>
A:Built-in CF card/B:Memory card
<Default: A:Built-in CF card>
Hide comment/Display comment/32-
char comment
<Default: Hide comment>
Save ladder programs/Save a ladder
program
<Default: Save a ladder program>
For GT
Setting range
Designer2
4.2 Debug Setting
1
2
For GT
Designer3
3
4
5
6
7
4 - 3