Menu Descriptions - Daikin WGZ030DW Operating And Maintenance Manual

Figure 10, Menu Matrix
UNIT
VIEW UNIT VIEW UNIT
STATUS
(1)
VIEW UNIT VIEW UNIT
STATUS
(5)
(Right side of matrix continued from above)
"ALARM" MENUS
ALARM LOG
(LAST)
TYPE, TIME
ALARM LOG
(NEXT TO LAST)
ALARM LOG
(SECOND TO
LAST)
ALARM LOG
LAST 25 SHOWN
Selection can be made within the matrix by using the LEFT/RIGHT keys to move between columns and
the UP/DOWN keys to move between rows.

Menu Descriptions

This section contains information on each screen. The menu screens are in order of the matrix in Figure
10 going from left to right and down when there are sub-menus. Many menus are self-explanatory. A
Setpoint menu allows selection of whether the unit has a water-cooled condenser, WaterCooled = Y (Yes)
or a remote condenser, WaterCooled = N (No). This selection will alter some menus as appropriate to the
type of condenser.
Screen Definitions – MENU
Top level menu:
ALARM menu:
ALARM
OMM 1130-2
CIRCUITS
VIEW VIEW
TEMP CIRC #1 CIRC #2
(1) STATUS STATUS
(1) (1)
VIEW VIEW
TEMP COMP #1 CIRC #2
(2) STATUS STATUS
(3) (3)
⇐ Continued ⇐
ACTIVE ALARM (1) SET UNIT
TYPE, TIME SPs, (1)
ACTIVE ALARM (2) SET UNIT SPs,
TYPE, TIME (2)
ADDITIONAL
ACTIVE ALARM (3) SET UNIT SPs,
CLEAR/VIEW (3)
SET UNIT SPs,
(4)
(to 13)
< ALARM
< VIEW
< SET
<
< ACTIVE
< LOG
<
<
"VIEW" MENUS
REFRIGERANT
VIEW VIEW
REFRIGERANT REFRIGERANT
CIRCUIT #1 CIRCUIT #2
(1) (1)
VIEW EVAP VIEW EVAP
(2) (2)
"SET" MENUS
SET COMP SET LIMIT
SPs (1) ALARMS (1)
SET COMP SET LIMIT
SPs ALARMS (2)
(2)
SET LIMIT
ALARMS (3)
"MENU"
FANS EVENTS
VIEW EVENT (1)
VIEW
FAN/TOWER
(1)
VIEW EVENT (n)
VIEW
FAN/TOWER
(n)
TEST
SET FANS (1) SET TEST UNIT
STAGES TOWER (1)
FANTROL (1)
SET FANS (2) SET
STAGE ON TOWER
(2)
SET FANS (3) SET
STAGE OFF TOWER
(3)
SET TOWER TEST UNIT
(to n) (7)
53