Bas Interface - Daikin WGZ030DW Operating And Maintenance Manual

BAS Interface

The BAS interface will use the supervisor port on the controller as a connection point.
Protocols Supported
The following building automation system (BAS) protocols are supported. It is possible to change the
building automation interface without loading different software.
BACnet®
When protocol is set to BACnet, the baud rate and ident set points are not accessible. The ident setting is
locked at 1 for BACnet, and the baud rate is locked to 19200.
LONworks®
With protocol set to LON, the baud rate and ident set points are not accessible. The ident setting is locked
at 1 for LON, and the baud rate is locked to 4800.
Modbus®
With the protocol set to Modbus, the baud rate and ident set points are accessible.
Available Parameters
Types: A = Analog, I= Integer, D= Digital
I/O: I = Input only, O = Output only , I/O = Input/Output
Type Index I/O
A 1 I/O
A 2 O
A 3 I/O
A 6 O
A 7 O
A 10 O
A 11 I
A 15 O
A 16 O
A 17 O
A 20 O
A 21 O
A 39 O
A 42 O
A 50 I/O
I 1 O
I 2 O
I 3 O
I 4 O
I 5 O
I 6 O
I 7 O
I 8 O
I 9 O
I 10 O
Continued next page.
72
Description
Network Cool LWT set point
Active LWT set point
Network limit set point
Evap LWT
Cond EWT
Unit capacity (%)
Network Cool LWT set point default
Suction temp
Evap sat temp
Evap pressure
Cond sat temp
Cond pressure
OAT
Active Capacity Limit
Network Ice LWT set point
Active alarms 1
Active alarms 2
Active alarms 3
Active alarms 4
Active alarms 5
Active alarms 6
Active alarms 7
Active alarms 8
Active alarms 9
Active alarms 10
WGZ030D through WGZ200D
L W BACnet Modbus
ON ORKS
x x
x x
x x
x x
x x
x x
x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
OMM 1130-2