Microscan QX-830 User Manual page 319

Multisymbol Separator
Serial Cmd: <K222,number of
Default: , (comma)
Options: Any 7-bit ASCII character
Start Trigger Start Character (Non-Delimited)
Serial Cmd: <K229,start
Default: NULL (0x00)
Options: Two hex digits representing any ASCII character except <, >, XON, and XOFF.
Stop Trigger Stop Character (Non-Delimited)
Serial Cmd: <K230,stop
Default: NULL (0x00)
Options: Two hex digits representing any ASCII character except <, >, XON, and XOFF.
Processing Timeout
Serial Cmd: <K245,processing
Default: 200 (0.2 seconds)
Options: 1 to 65535
Scan Speed
Serial Cmd: <K500,scan
Default: 30 (300 scans per second)
Options: 30 to 140 (x10 scans per second)
Maximum Element
Serial Cmd: <K502,maximum
Default: 400 (x 0.01% of scan)
Options: 50 to 5000
Automatic Gain Control
AGC Level
Serial Cmd: <K504,AGC
Default: 40 (QX-830 model-dependent – see Microscan Product Pricing Catalog)
Options: 0 to 255
AGC Mode
Serial Cmd: <K504,AGC
Default: 2 = Continuous
Options: 0 = Disabled
QX-830 Compact Industrial Scanner User's Manual
symbols,multisymbol
character>
character>
timeout>
speed>
element>
level,AGC mode,minimum gain,maximum gain>
level,AGC mode,minimum gain,maximum gain>
1 = Leading Edge
separator>
2 = Continuous
Appendices
A-31