Microscan QX-830 User Manual page 189

Three Beeps
Hold down button until three quick beeps are heard (and the 20%, 40%, and 60% LEDs
illuminate).
Disabled
When set to Disabled, the associated button position will have no function associated with
it, and the position will be skipped over.
Read Rate
Read Rate is initiated when the associated button position is selected. Read Rate will
perform decodes/second and is the same as sending a
Read Rate, quickly press and release the EZ Button.
Calibration
Calibration is initiated when the associated button position is selected. To cancel Calibration,
quickly press and release the EZ Button.
Save for Power-On
All scanner settings will be saved to non-volatile memory to be recalled on power-on
whenever the associated button position is selected. This is the same as sending a
from ESP's Terminal.
Auto Framing
Auto Framing is initiated when this button position is selected. To cancel Auto Framing,
quickly press and release the EZ Button.
Load New Master
Functions in the same way as
position is selected.
Sleep Mode
When Sleep Mode is selected, the scanner will shut the motor and laser off when this
button position is selected. To cancel Sleep Mode, quickly press and release the EZ Button.
Bar Code Configuration
Enables Bar Code Configuration Mode
selected. When enabled, the scanner can accept configuration commands from symbols.
To disable, quickly press and release the EZ Button.
QX-830 Compact Industrial Scanner User's Manual
New Master Pin input whenever the associated button
whenever the associated button position is
Scanner Parameters
<C> from ESP's Terminal. To exit
<Z>
5-123