Microscan QX-830 User Manual page 181

Static Presentation
Static Presentation Mode is used in conjunction with
When operating in Static Presentation Mode, the red LEDs will illuminate while the
scanner is searching for a symbol in Continuous Read mode. When a symbol is placed
in the field of view and a good read occurs, the green LEDs will illuminate and stay on for
the duration of time set in
unless more than one symbol is enabled in
Note: If Static Presentation Mode is selected but the scanner is not in Continuous
Read, the Green Flash will not occur.
To use Static Presentation:
1. Enable Continuous Read.
2. Select the number of symbols.
3. Enable Static Presentation in
4. Select the read time in Green Flash Duration.
Match
The green LEDs will flash when a match condition is met. If multisymbol is enabled, then
green flash LEDs will illuminate only if all symbols qualify as a match. If matchcode is
disabled, then this mode will activate the LEDs on a good read.
Mismatch
Same as Match, except that LEDs will illuminate on a mismatch.
QX-830 Compact Industrial Scanner User's Manual
Green Flash Duration. Only one read will occur during that time
Number of
Green Flash
Scanner Parameters
Continuous Read
Symbols.
Mode.
mode.
5-115