Main Fan Assy - Brother HL-3040CN Service Manual

8.56 Main Fan ASSY

(1) Disconnect the Connector (CN2) of the Main fan ASSY from the High-voltage power
supply PCB ASSY.
High-voltage power supply PCB ASSY
(2) Remove the Main fan ASSY from the Side frame R.
Assembling Note:
When assembling the Main fan ASSY, place it so that the attached label faces outwards.
Harness routing: Refer to
CN2
Fig. 5-168
Fig. 5-169
" Main Fan ASSY, LV Fan ASSY."
5-131
Main fan ASSY
Side frame R
Connector
<Right side>
Main fan ASSY
Side frame R
<Right side>
Confidential