9.20 Main PCB ASSY
(1) Turn the Printer upside down.
(2) Disconnect the two Flat cables and the four Connectors from the Main PCB ASSY.
(3) Remove the four Taptite cup S M3x6 SR screws.
(4) Release the Hook to remove the Main PCB ASSY and the Main PCB sheet.
Taptite cup S
M3x6 SR
Connector (T1 clutch ASSY)
Connector (REG clutch ASSY)
Connectors
Main PCB sheet
Main PCB ASSY
Flat cable (paper eject sensor PCB ASSY)
Fig. 3-49
3-50
Flat cable
Connectors
Flat cable
Hook
Flat cable
(main motor)
Connector
(LVPS harness ASSY)
Confidential