(5)
Remove the ACSF sensor actuator by spreading the hooks.
<Bottom view of the Platen cover>
Platen cover
4.9.7
Main Roller ASSY
Note:
After replacing Main roller ASSY and Main roller gear 40, adjustment is
need by using the Service software tool.
<Disassembly>
(1)
Remove the screw, then Gear shaft 4 calking ASSY from the Chassis R.
Two grooves
Chassis R
Fig. 3.41
Taptite, bind M26x4
Gear shaft 4 calking ASSY
Fig. 3.42
III-29
ACSF sensor actuator