Brother HL-3040CN Service Manual page 170

(5) Put the two Pins of the Separation pad ASSY into the Paper tray.
Note:
Apply grease to the separation pad ASSY before mounting the Paper tray.
(Refer to "4. LUBRICATUION" in Chapter
Paper tray
(6) Set the Pad spring in a way that the "E" of the Separation pad ASSY fits into the "F", and
assemble the two Hooks of the Separation pad ASSY to the Paper tray.
Note:
Check that the Separation pad ASSY pivots up and down smoothly by pushing it
gently.
Hook
"F"
Pad spring
(7) After replacing the Paper feeding kit, reset the counter. (Refer to
Function" in Chapter7.)
Pin
Fig. 4-33
"E"
Fig. 4-34
4-20
5.)
Separation pad ASSY
Pin
Separation pad ASSY
Hook
"2.3 Parts Life Reset
Confidential