Pf Registration Solenoid - Brother HL-3040CN Service Manual

(3) Remove the five Taptite bind B M4x12 screws, and then remove the Cleaner PF gear
cover from the Side frame L.
Taptite bind B M4x12
Assembling Note:
When assembling the Cleaner PF gear cover, make sure to place the Pick-up sector gear
spring and PF registration solenoid harness correctly as shown in the figure below.
Pick-up sector gear spring

PF registration solenoid

harness
Fig. 5-131
PF registration solenoid
harness
PF registration solenoid
harness
Fig. 5-132
5-108
Taptite bind B M4x12
Taptite bind B M4x12
Cleaner PF gear cover
Side frame L
Pick-up sector gear spring
Side frame L
Confidential