Brother HL-3040CN Service Manual page 361

[2] Printout of worker switch data (Function code 11)
<Function>
The machine prints out the setting items of the worker switches and their contents specified.
<Operating procedure>
(1) Press the or
the maintenance mode. Then, press the OK button. The machine displays "PRINTING"
on the LCD.
(2) Printing of the CONFIGURATION LIST (see the figure below) is started. When printing is
finished, the machine returns to the initial state of the maintenance mode.
Note:
The function names specific to multi-function machines are printed in CONFIGURATION
LIST for convenience of program development. They are invalid in this product and should
be ignored.
These settings must not be changed.
button to display "MAINTENANCE 11" on the LCD in the initial state of
Fig. 7-2
7-7
Confidential