Other Service Functions; Not-Disclosed-To-Users Function Menus Enabled By Pressing Button (S) When Turning The Machine On - Brother HL-3040CN Service Manual

2.

OTHER SERVICE FUNCTIONS

2.1 Not-disclosed-to-users Function Menus Enabled by
Pressing Button (s) When Turning the Machine On
The following settings and functions will be available by holding down the specified button (s)
while turning the machine on.
■ Press one button when turning the machine on
Panel operation
Go
Secure Print
Back
( - )
( + )
OK
Cancel
* You can print data from the computer as hexadecimal code. It is useful to analyze print data
itself whether it is okay or not.
■ Press two buttons at the same time when turning the machine on
Panel operation
OK
Go
Go
( - )
( - )
Go
Go
OK
* This mode is to start-up the machine without using the engine. When the error related to the
engine occurs, you can ignore the error and get the error history or the other counter
information though it is impossible to print. When the machine doesn't work in case that the
connection failure between the main controller and the engine controller occurs, it is possible
to update the main controller itself to recover from the failures.
Not used
Not used
Not used
Hex dump mode*
Not used
Don't use
Not used
Back Don't use
( + ) Not used
Back Engine non-startup mode*
( + ) Don't use
OK Don't use
OK Not used
Cancel Flash ROM updates mode
(UPD file/Model classification is available.)
( + ) Obtain the wireless LAN MAC address (Ethernet address).
(HL-3070CW only)
Function
Function
7-43
Confidential