Control Panel Cover Assy - Brother HL-3040CN Service Manual

8.10 Control Panel Cover ASSY

(1) Remove the four Taptite cup S M3x6 SR screws and LED FG harness ASSY.
(2) Release the three Hooks to remove the Main shield cover plate ASSY from the Main body.
LED FG harness ASSY
Taptite cup S M3x6 SR
Main shield cover plate ASSY
Taptite cup S M3x6 SR
Hook
Note:
After removing the Main shield cover plate ASSY, do not set up the main body with the left
side down. The machine may get damaged due to load applied to the paper feed motor.
(3) Disconnect the three Connectors (CN1, CN2, CN3) and cables from the Main PCB ASSY.
(CN1, CN2: HL-3070CW only)
Hook
Fig. 5-32
Main PCB ASSY
CN10 CN9
CN14
CN19
CN18
CN13 CN12 CN11
Fig. 5-33
5-48
Main body
<Left side>
CN4
CN1
CN2
CN3
CN5
Hook
Confidential