Detailed Description Of Maintenance-Mode Functions; Eeprom Parameter Initialization (Function Code 01, 91) - Brother HL-3040CN Service Manual

1.4

Detailed Description of Maintenance-mode Functions

1.4.1

EEPROM parameter initialization (Function code 01, 91)

<Function>
This function initializes the setting values of the operation parameters, user switches, and
worker switches (WSW) registered in the EEPROM.
Entering function code 01 initializes almost all of the EEPROM areas, but entering 91 does not
initialize some areas, as listed below.
User switches (Items to be initialized
when resetting to the factory default
settings)
Worker switch
(Refer to APPENDIX
Function settings except user switches
(Items except the factory default
settings)
- Languages
- Reprint
- Secure Print
- Interfaces
LAN area (Network settings)
PCL core area
(Emulation settings) (HL-3070CW only)
Operation lock of the control panel
password
<Operating procedure>
(1) Press the
according to your need) on the LCD in the initial state of the maintenance mode.
Then, press the OK button. The "PARAMETER INIT" appears on the LCD.
(2) Upon completion of parameter initialization, the machine returns to the initial state of the
maintenance mode.
Data item
1.)
or button to display "MAINTENANCE 01" (or "MAINTENANCE 91"
Function code 01
All of these will be
initialized.
7-3
Function code 91
These will be
initialized.
These will not be
initialized.
These will be
initialized.
These will not be
initialized.
Confidential