Brother HL-3040CN Service Manual page 308

(6) Remove the two Taptite bind B M4x12 screws and two Taptite cup S M3x6 SR screws,
and then remove the LVPS unit from the Main body.
Main body
LVPS unit
Taptite bind B M4x12
Assembling Note:
When assembling the LVPS unit onto the Main body, make sure to assemble it in a way that
the LVPS plate is placed at a lower position than the Middle plate.
<Back side>
Fig. 5-174
LVPS plate
LVPS unit
LVPS plate
Middle plate
LVPS unit
Fig. 5-175
5-134
Taptite cup S M3x6 SR
Middle plate
Middle plate
Confidential