Brother HL-3040CN Service Manual page 70

Error
Problem
codes
5F Waste toner box near full
60 Toner life end (C)
61 Toner life end (M)
62 Toner life end (Y)
63 Toner life end (K)
64 Toner life end soon (C)
65 Toner life end soon (M)
66 Toner life end soon (Y)
67 Toner life end soon (K)
6A Fuser unit error
(The center thermistor does not
detect 60 °C within the specified
time.)
6B Fuser unit error
(The center thermistor does not detect
100 °C within the specified time.)
6C Fuser unit error
(The center thermistor detects higher
temperature than the specified value.)
6D Fuser unit error
(The center thermistor detects lower
temperature than the specified value.)
6F Fuser unit error
(The center or side thermistors
detect extremely high temperature.)
70 Fuser/Eject drive motor error
73 Recording ASIC read/write error
74 Toner of the color which is being used
reaches the end of life while printing.
75 Machine cooling down inside
76 Fuser unit error (The center thermistor
detects rapid temperature rising.)
78 Fuser unit error (The center thermistor
detects rapid temperature falling.)
7D Dirt on drum unit
81 Incorrect density sensor measurement
value when implementing adjustment
of color density from the control panel
cover ASSY.
82 Density patch measurement is
not completed normally when
implementing adjustment of color
density from the control panel cover
ASSY.
83 Drum error (K)
Refer Error
to: codes
3-27 84 Paper jam at the back of the machine
inside
3-28
3-28 87 Toner of the color which is being
used reaches the end of life when
3-28
implementing adjustment of color
3-28 density from the control panel cover
ASSY.
3-29
3-29 88 Paper jam inside the machine
3-29 8A Paper jam in paper tray
3-29 8D Eject front sensor sticking at ON
upon startup
3-25
8E Error in the adjustment of color
registration result when implementing it
from the control panel cover ASSY.
3-25 8F Detection of abnormal value of
registration sensor sensitivity when
implementing adjustment of color
registration from the control panel
3-25
cover ASSY
91 Size mismatch
3-25 94 No paper in paper tray
96 No paper in all trays
97 Not supported paper
3-25 9A No paper in manual feed slot
9D Detection of incorrect registration
sensor measurement value when
3-29 implementing adjustment of color
registration from the control panel
3-30
cover ASSY
3-30
9E Toner of the color which is being
used reaches the end of life when
3-31 implementing adjustment of color
registration from the control panel
3-25
cover ASSY.
3-26 9F No paper while printing
A1 Top cover opened
3-31 C0 Identification failure for a new toner
cartridge (K)
3-34
C1 Identification failure for a new toner
cartridge (Y)
C2 Identification failure for a new toner
3-34 cartridge (M)
C3 Identification failure for a new toner
cartridge (C)
C6 Pressure engagement/disengagement
failure of toner cartridge
3-13 C7 Insufficient memory
3-6
Problem
Confidential
Refer
to:
3-35
3-30
3-35
3-36
3-36
3-37
3-37
3-37
3-38
3-39
3-39
3-39
3-37
3-30
3-40
3-40
3-41
3-41
3-41
3-41
3-42
3-42