Panel Pcb Assy - Brother HL-3040CN Service Manual

Color printer
Hide thumbs Also See for HL-3040CN:
Table of Contents

Advertisement

8.12 Panel PCB ASSY

(1) Release the three Hooks to remove the Panel PCB ASSY from the Control panel cover ASSY.
Note:
Be careful that the Flat cable of the LCD is connected to the Panel PCB ASSY.
Panel PCB ASSY
(2) Release the Lock and disconnect the Flat cable (CN1) from the Panel PCB ASSY.
Note:
- After disconnecting the flat cable(s), check that each cable is not damaged at its end
or short-circuited.
- When connecting the flat cable(s), do not insert it at an angle. After insertion, check
that the cable is not at an angle.
Panel PCB ASSY
Harness routing: Refer to
Flat cable
Fig. 5-38
CN1
Fig. 5-39
"
Control Panel Cover ASSY (HL-3070CW only)."
Refer to
"
Control Panel Cover ASSY (HL-3040CN only)."
5-52
Control panel cover ASSY
Hook
Lock
Flat cable
Confidential

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-3070cw

Table of Contents