Brother HL-3040CN Service Manual page 422

The functions and settings for each worker switch (WSW) are described below;
WSW47 (Switching between high-speed USB and full-speed USB)
■
Selector No.
1
|
7
8
WSW54 (PictBridge command delay time (HL-3070CW only))
■
Selector No.
1
2
3
|
8
- Selector 1 and 2: PictBridge command delay time (HL-3070CW only)
These selectors specify the PictBridge command delay time that applies when the machine
responds to the digital camera connected via PictBridge during negotiation. If the machine fails to
receive data from the digital camera, change the delay time.
Function
Not used
Switching between high-speed
USB and full-speed USB
Function
PictBridge command delay time
(HL-3070CW only)
Not used
Setting and Specifications
0: Auto switching between high-speed
USB (ver. 2.0) and full-speed USB
(ver. 1.1)
1: Fixed to full-speed USB (ver. 1.1)
Setting and Specifications
No. 1 2
0 0: 100 msec (default)
0 1: 0 msec
1 0: 50 msec
1 1: 200 msec
App.1-2 Confidential