Cruise Control - Mahindra Goa 2007 Owner's Manual

Table of Contents

Advertisement

Cruise Control

Cruise Control (if Installed)
Important Information
• Cruise control will be active in gears
2nd to 5th with vehicle speed more
than 25 km/h.
• DO NOT use cruise control on winding
(or) slippery road surfaces (rainy/icy/
snow-covered), up-hill / down-hill
driving (or) in traffic conditions where
a constant speed can not easily be
maintained.
MAHINDRA GOA
• Cruise control will not be activated if
the brake pedal is not operated once,
after the engine starting.
• Cruise control will be deactivated, if
Brake / clutch pedal is pressed, during
cruise driving mode.
• When the 'Set Plus' button is pressed,
if the acceleration is felt to be too fast
and vehicle goes beyond control, press
brake or clutch immediately for safety
and coming out of cruise.
The cruise control system enables the driver
to maintain the constant road speed, with
out using the accelerator pedal, generally
when driving on free/open highways.
The cruise control system is designed to
operate above the speed of 25 km/h.
Before Driving
To Operate/Set the Cruise Control Speed
1. Accelerate until the desired cruising
speed is reached and the speed must be
above the system's minimum operational
speed of 25 km/h.
2. Release the accelerator pedal and press
& release the SET+ (or) SET- switch, to
set the vehicle. The desired vehicle speed
will automatically be maintained without
accelerator pedal operation.
While operating cruise control, the vehicle
speed can be increased temporarily (e.g.
for overtaking) by pressing the accelerator
pedal enough. Once the accelerator pedal
is released, the vehicle speed will return to
the set cruising speed. If the accelerator
pedal is pressed for more than 30 seconds,
the cruise control will be deactivated.
2
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents