Lighting Control – Turn Indication; Parking Lights; Headlamp High Beam; Headlamp On Dipped Beam - Mahindra Genio DC BS-IV Maintenance Manual

Maintenance Manual
GENIO DC
(BS-III & BS-IV)
Lighting Control – Turn Indication
When the lever is pushed down to position
vehicle to blink. When the lever is pulled upward to position
left side of the vehicle to blink. As the turn is completed, the lever will automatically return to
the center position and turn
Parking Lights – Turn the knob upward to first position switches ON the parking and side light
of the vehicle exterior lighting system.
Headlamp High beam –
switches ON the headlamp high beam.
Headlamp ON dipped beam –
headlamp dipped beam.
Hazard warning indicator –
turn-indications simultaneously.
NOTE: the direction indicators do not work when the hazard warning is activated.
•
10000kms, and then every 10000kms.
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2011 Mahindra & Mahindra Ltd.
C it causes the turn signals on the right side of the
OFF the signals at the same time.
With the headlamp dipped beam ON, pushing stack downward
Turn the knob upward to second position switches ON the
Press the switch (located on the instrument panel) to activate all
Lights, Horns, Wipers & Washers to be inspected at 5000kms,
MAN-00
JULY 2011
A it causes the turn signals on the
135
/Rev1
46