Wall Mounting The Tlp 710Mv With A Wall Box; Desktop Mounting The Tlp 710Tv; Placement Without A Mounting Kit; Placement With A Kensington Security Lock - Extron electronics TouchLink TLP 710MV User Manual

Wall Mounting the TLP 710MV with a Wall Box

The TLP 710MV can be wall mounted using the Extron BB 710M or the Extron
EWB 710M. Follow the instructions provided with the appropriate wall box.
Desktop Mounting the TLP 710TV

Placement without a Mounting Kit

The TLP 710TV comes assembled with a stand that allows it to be placed on a desktop.
To secure the unit to the desktop:
Figure 42.
1.
2.
3.

Placement with a Kensington Security Lock

For additional security, the rear edge of the base has a metal-reinforced slot, which may
be used to attach a Kensington Security Lock (not provided). Follow the instructions that
are provided by the manufacturer to install the lock.
TLP 710TV Base (Bottom View), Showing Mounting Holes
Mark the location of two holes, 3.07 inches (78 mm) apart.
Drill two holes through the desktop from underneath.
Attach the TLP 710TV, using two #8 wood screws through the desktop from
underneath into the two holes in the base.
Kensington Security Slot
Figure 43. TLP 710TV Base, Showing Kensington Security Slot
Mounting Holes (2)
TLP 710MV and TLP 710TV • Mounting 38