Using Global Configurator
NOTE:
This section provides an overview of the Global Configurator program. For complete
information about the program, see the Global Configurator help file (select
from the
NOTE:
1.
To configure the touchpanel, use Global Configurator version 3.3 or later.
menu or press the <F1> key while the program is running).
Help
This section describes how to set up Global Configurator project with an
IPL 250. While setting up a project with another IP Link product is similar, see the
Global Configurator help file for exact information about the product being used.
Double-click the GC3 desktop icon. The Global Configurator 3 Start Options box
opens.
Global Configurator 3 Start Options
Figure 33.
TLP 710MV and TLP 710TV • Configuration Software
Contents
30