Ricoh B156 Service Manual page 620

FAX UNIT (B750)
18. Connect the telephone line to the LINE jack [A].
19. Put the power plug into the outlet and turn the main switch ON.
⇒
NOTE: Make sure that the outlet is grounded.
⇒
NOTE: "SRAM has been formatted" is displayed after you turn ON the main
⇒
switch. Turn the main switch OFF and ON to use the machine. If the
display reoccurs, check the battery on the MBU board (step 8) is in the
ON position and the MBU is seated correctly on the FCU board.
20. Make sure that the date and time are correctly set.
B750
CÓPIA NÃO CONTROLADA
[A]
B750I107.WMF
6
CÓPIA NÃO CONTROLADA
Rev. 06/2005
SM