Replacement And Adjustment; Tray Cover Replacement; Tray Cover Removal; Tray Cover Attachment - Ricoh B156 Service Manual

1. REPLACEMENT AND ADJUSTMENT

CAUTION
Turn off the main power switch and unplug the machine before beginning
any of the procedures in this section.
NOTE: This manual uses the following symbols.
☛ : See or Refer to
: E-ring

1.1 TRAY COVER REPLACEMENT

[B]
[E]

1.1.1 TRAY COVER REMOVAL

1. Remove the tray cover [A] by pressing on the two pawls [B] on the left side of
the cover.

1.1.2 TRAY COVER ATTACHMENT

NOTE: The right side of the tray cover should be attached first.
1. Fit the pawls [C] (just below the cover fin) around the thin bar [D] on the shift
tray.
2. Align the square [E] so that it fits into the groove in the underside of the tray
cover and does not interfere with the attachment of the cover.
3. Complete the attachment by inserting the left side pawls [B] into place.
SM
CÓPIA NÃO CONTROLADA
: Screws
[A]
1
CÓPIA NÃO CONTROLADA
TRAY COVER REPLACEMENT
: Connector : Clip ring
[C]
[D]
B510R151.WMF
B510