Copy Adjustment; Printing; Registration - Leading Edge/Side-To-Side - Ricoh B156 Service Manual

3.12 COPY ADJUSTMENT

3.12.1 PRINTING

NOTE: 1) Make sure the paper is installed correctly in each paper tray before you
start these adjustments.
2) Use the Trimming Area Pattern (SP5-955-1, No.11) to print the test
pattern for the following procedures.
3) Set SP 5-955-1 to 0 again after completing these printing adjustments.

Registration - Leading Edge/Side-to-Side

1. Check the leading edge registration for each paper feed station, and adjust
them using SP1-001.
2. Check the side-to-side registration for each paper feed station, and adjust them
using SP1-002.
Tray
Any paper tray
By-pass feed
Duplex
1st paper tray
2nd paper tray
3rd paper tray (optional
paper tray 1), or LCT
4th paper tray (optional
paper tray 2)
By-pass feed
Duplex, side 2
SM
CÓPIA NÃO CONTROLADA
SP mode Specification
SP1-001-1
3 ± 2 mm
SP1-001-9
SP1-001-12
SP1-002-2
SP1-002-3
SP1-002-4 2 ± 1.5 mm
SP1-002-5
SP1-002-1
SP1-002-6
3-59
CÓPIA NÃO CONTROLADA
COPY ADJUSTMENT
B
A
B156R291.WMF
A: Leading Edge Registration
B: Side-to-side Registration
B156/B220