Sp6-Xxx: (Peripherals) - Ricoh B156 Service Manual

SP6-XXX: (Peripherals)

Mode No.
6
(Class 1, 2, and 3)
006* ADF Adjustment
1 S-to-S Registration
2 Leading Edge
Registration
3 Trailing Edge Erase
4 S-to-S Registration
(Rear)
5 Sub-san Magnification
6 Orig. Buckling
7 Buckle Adjustment
007 DF Input Check
1 Original Set
2 Original Width 1
3 Original Width 2
4 Original Length 1
5 Original Length 2
6 Orig. Trailing Edge
7 Cover Open
8 DF Position
9 Registration
10 Original Exit
11 Original Reverse
008 DF Output Check
1 Feed Motor (Forward)
2 Feed Motor (Reverse)
3 Trans. Motor
(Forward)
4 Feed Clutch
5 Pick-up Solenoid
6 Junction Gate
Solenoid
7 Stamp Solenoid
SM
CÓPIA NÃO CONTROLADA
Adjusts the side-to-side registration of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
First adjust the copier registration. Then if ADF
registration is incorrect, adjust this SP.
Adjusts the sub-scan registration of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Adjusts the trail edge erase of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Adjusts the rear-side side-to-side registration of the
optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
First adjust the copier registration. Then if ADF
registration is incorrect, adjust this SP.
Adjusts the sub-scan magnification of the optional ADF.
[–5.0 ∼ 5.0 / 0 / 0.1 %/step]
Enables/disables original buckling during rear side
scanning. Disable if the customer is scanning fragile
originals.
[0 ∼ 1 / 1 / 1 /step]
• 0: Disabled
• 1: Enabled
Adjusts original buckling for rear side scanning.
[–5.0 ∼ 5.0 / 0 / 0.1 mm/step]
Displays the signals received from sensors and switches
of the ARDF.
See section 5.1.4
Do not check another item before the result is returned.
Switches on each electrical component of the ARDF for
testing.
See section 5.1.5
Do not start to check another item before ending the test
that is in progress.
5-53
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function / [ Setting ]
B156/B220