Ricoh B156 Service Manual page 661

System Switch 04
No FUNCTION
4-7 Not used
System Switch 05 - Not used (Do not change the factory settings.)
System Switch 06
No FUNCTION
0 Margin setting for Create
to Margin Transmission
7
System Switch 07 - Not used (Do not change the factory settings.)
System Switch 08 - Not used (Do not change the factory settings.)
System Switch 09
No FUNCTION
0 Addition of image data from
confidential transmissions on
the transmission result report
0: Disabled 1: Enabled
1 Inclusion of communications on
the Journal when no image
data was exchanged.
0: Disabled 1: Enabled
2 Automatic error report printout
0: Disabled 1: Enabled
3 Printing of the error code on the
error report
0: No 1: Yes
4 Not used
5
Power failure report
0: Disabled 1: Enabled
6 Conditions for printing the
protocol dump list
0: Print for all communications
1: Print only when there is a
communication error
SM
CÓPIA NÃO CONTROLADA
Do not change these settings.
71 to 99 (BCD) %. This setting determines the
reduction ratio when the user uses the Create
Margin Transmission feature.
Default setting:1001 0011 (93%)
If this feature is enabled, the top half of the first
page of confidential messages will be printed on
transmission result reports.
0: Communications that reached phase C (message
tx/rx) of the T.30 protocol are listed on the Journal.
1: Communications that reached phase A (call
setup) of T.30 protocol are listed on the Journal.
This will include telephone calls.
0: Error reports will not be printed.
1: Error reports will be printed automatically after
failed communications.
1: Error codes are printed on the error reports.
Do not change this setting.
1: A power failure report will be automatically printed
after the power is switched on if a fax message
disappeared from the memory when the power was
turned off last.
This switch becomes effective only when system
switch 00 bit 6 is set to 1.
1: Set this bit to 1 when you wish to print a protocol
dump list only for communications with errors.
47
CÓPIA NÃO CONTROLADA
BIT SWITCHES
SP No. 1-101-005
COMMENTS
SP No. 1-101-007
COMMENTS
SP No. 1-101-010
COMMENTS
B750