Ricoh B156 Service Manual page 272

SERVICE PROGRAM MODE
Mode No.
5
(Class 1, 2, and 3)
846 3 Maximum Entries
6 Delivery Server Retry
Timer
7 Delivery Server Retry
Times
8 Delivery Server
Maximum Entries
10 LDAP Search Timeout
47 Initialize Local Addr
Book
48 Initialize Delivery Addr
Book
49 Initialize LDAP Addr
Book
50 Initialize All Addr Book
51 Backup All Addr Book
52 Restore All Addr Book
53 Clear Backup Info
90 Plain Data Forbidden
91 FTP Auth Port Setting
94 Encryption Stat
B156/B220
CÓPIA NÃO CONTROLADA
Specifies the maximum entry counts.
[2000 ~ 20000 / 2000 / 1 /step]
Specifies the retry interval. The retry is executed when
the machine fails to get an address book from the
distribution server.
[0 ~ 255 / 0 / 1 second/step]
NOTE: When this SP is set to "0", the retry is not
executed.
Specifies the retry times. The retry is executed when the
machine fails to get an address book from the
distribution server.
[0 ~ 255 / 0 / 1 /step]
NOTE: When this SP is set to "0", the retry is not
executed.
Specifies the maximum account entries in the
distribution server user information that UCS controls.
[2000 ~ 20000 / 2000 / 1 /step]
Specifies the timeout for searching the LDAP server.
[1 ~ 255 / 60 / 1 /step]
Clears the local address book information, including the
user code.
Clears the distribution address book information, except
the user code.
Clears the LDAP address book information, except the
user code.
Clears all the address book information, including the
user code.
NOTE: The administrator's account information cannot
be cleared with this SP.
Uploads all directory information to the SD card.
Downloads all directory information from the SD card.
Deletes the address book data from the SD card in the
service slot.
Deletes only the files that meet same machine category.
This feature does not work if the card is write-protected.
NOTE: After you do this SP, go out of the SP mode,
and then turn the power off.
Do not remove the SD card until the Power
LED stops flashing.
Enables or disables the address book data writing to the
HDD or SD card in plane data.
[0 ~ 1 / 0 / 1 /step]
0: Enable
1: Disable
Specifies the FTP port for getting a distribution server
address.
[0 ~ 65535 / 3671 / 1 /step]
Shows the status of the encryption function for the
address book data.
5-44
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
SM