Ricoh B156 Service Manual page 266

SERVICE PROGRAM MODE
Mode No.
5
(Class 1, 2, and 3)
828 91 Web
(0: OFF 1: ON)
832 HDD
Enter the SP number for the partition to initialise, then press . When the execution
ends, cycle down and on.
NOTE: Use this SP mode only for hard disk error recovery.
1 HDD Formatting (ALL)
2 HDD Formatting (IMH)
3 HDD Formatting
(Thumbnail)
4 HDD Formatting
(Job Log)
5 HDD Formatting
(Printer Fonts)
6 HDD Formatting
(User Info)
7 Mail RX Data
8 Mail TX Data
9 HDD Formatting
(Data for a Design)
10 HDD Formatting (Log)
11 HDD Formatting
(Ridoc interface)
833 e-Cabinet enable
e-Cabinet enable
836 Capture Setting
1 Capture Function
0: Off 1: On
2 Panel Setting
B156/B220
CÓPIA NÃO CONTROLADA
Turns on/ off the web.
[0 ~ 1 / 1 / 1 /step]
• 0: OFF
• 1: ON
Initializes the hard disk.
Initializes followings:
• Documents stored on the document server
• Stamp print data
• Scanner delivery images
• Fax delivery images
Initializes MCS thumbnail images.
Initializes lob data used by the Poplar server.
Initializes printer fonts, overlay forms.
Initializes user information (UCS).
Initializes mail receive data (DCS)
Initializes mail send data (DCS)
Designer use only.
Initializes the logs (fax history and debug log).
Initializes the Net File management area.
Enables/disables the e-Cabinet.
[0 ~ 1 / 0 / 1 /step]
• 0: Disabled
• 1: Enabled
The "e-Cabinet" supplies the interface for registration,
editing, deleting and obtaining the user's code name.
NOTE: Turn the main switch on and off after using this
SP.
NOTE:
Turn the capture function on/off.
[0 ∼ 1 / 0 / 1 /step]
• 0: Off
• 1: On
Displays or does not display the capture function
buttons.
[0 ∼ 1 / 0 / 1 /step]
• 0: Displayed
• 1: Not displayed
5-38
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
SM