Input Check; Main Machine Input Check (Sp5-803) - Ricoh B156 Service Manual

5.1.4 INPUT CHECK

Main Machine Input Check (SP5-803)

1. Enter the SP mode and select SP5-803.
2. Select an item that you want to check. A small box will be displayed on the SP
mode screen with a series of 0's and 1's.
The meaning of the display is as follows.
0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
3. Check the status of each item against the corresponding bit numbers listed in
the table below.
SP5-803
-XXX
1 Tray 1 Set
Tray 1 Paper End
2
Tray 1 Paper
3
Near End
Tray 1 Paper Size
4
5 Tray 2 Set
Tray 2 Paper End
6
Tray 2 Paper
7
Near End
Tray 2 Paper Size
8
9 Registration Sensor
10 Paper feed sensor 1
11 Paper feed sensor 2
12 Right Cover SW
13 Exit Sensor
14 Paper Overflow
15 Exit Cover Switch
16 Interchange Unit Set
17 Interchange Exit
18 By-pass Tray Set
By-pass Paper End
19
20 By-pass Paper Size
21 Fusing Unit Set
Fusing Exit
22
23 Fusing Oil End
Fusing High
24
Temperature
Fuser Entrance
26
Sensor
SM
CÓPIA NÃO CONTROLADA
Description
Tray 1 set (standard tray)
Tray 1 paper end sensor
(standard tray)
Tray 1 paper near-end
sensor (standard tray)
Tray 1 paper size switch
(standard tray)
Tray 2 set (standard tray)
Tray 2 paper end sensor
(standard tray)
Tray 2 paper near-end
sensor (standard tray)
Tray 2 paper size switch
(standard tray)
(Upper relay)
(Lower relay)
Fusing entrance sensor
5-101
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Reading
0 1
Set Not set
Paper is
Paper End
present
Not near end Near end
(See table 1.)
Set Not set
Paper is
Paper End
present
Not near end Near end
(See table 1.)
Detected Not detected
Detected Not detected
Detected Not detected
Closed Open
Detected Not detected
Full Not full
Closed Open
Set Not set
Detected Not detected
Not set Set
Paper is
Paper End
present
(See table 2.)
Set Not set
Paper is
Paper End
present
Not End End
Detected Not detected
Detected Not detected
B156/B220