Outline; Installation Of The Inverter And Enclosure Design - Mitsubishi Electric FR-A700 Instruction Manual

1
This chapter describes the basic "OUTLINE" for use of this
product.
Always read the instructions before using the equipment
1.1 Product checking and parts identification................2
1.2 Inverter and peripheral devices ...............................3
1.3 Method of removal and reinstallation of the front
cover .......................................................................6

1.4 Installation of the inverter and enclosure design .....8

<Abbreviations>
DU ..........................................Operation panel (FR-DU07)
PU................................................Operation panel (FR-DU07) and parameter unit (FR-PU04/
Inverter ...................................Mitsubishi inverter FR-A700 series
FR-A700 .................................Mitsubishi inverter FR-A700 series
Pr. ...........................................Parameter Number
PU operation...........................Operation using the PU (FR-DU07/FR-PU04/FR-PU07).
External operation ..................Operation using the control circuit signals
Combined operation ...............Combined operation using the PU (FR-DU07/FR-PU04/
Mitsubishi standard motor ......SF-JR
Mitsubishi constant-torque motor.SF-HRCA
Vector dedicated motor...........SF-V5RU
<Trademarks>
• L W ® is a registered trademark of Echelon Corporation in the U.S.A and other
ON ORKS
countries.
®
• DeviceNet is a registered trademark of ODVA (Open DeviceNet Vender Association,
Inc.).
• Other company and product names herein are the trademarks and registered
trademarks of their respective owners.

OUTLINE

FR-PU07)
FR-PU07) and external operation.
1
2
3
4
5
6
7
1