Nokia 9000i Service Manual page 227

After Sales
Technical Documentation
After the image is programmed, the updated memory area is
checksummed and the result is compared to the one given in the header
file. The memory area between 3FFFC00h – 3FFFFFFh is not included in
the area where the checksumming is done.
3.6.3 – Erase Flash
This menu provides means to erase one or more blocks of the PDA Flash
memory in parallel to all the targets.
User options are:
Start Physical Address default: 3A00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3A00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash erasing has been successful
3.6.4 – Lock Flash
This menu provides means to lock one or more blocks of the PDA Flash
memory in parallel to all targets.
User options are:
Start Physical Address default: 3C00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3E00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash locking has been successful
Amendment 1 04/97
RAE/RAK–1N
Service Software
Range: 3A00000h
3C00000h
3E00000h
Range: 3A00000h
3C00000h
3E00000h
Range: 3A00000h
3C00000h
3E00000h
Range: 3A00000h
3C00000h
3E00000h
Page 7– 69